The INUTEQ-PAC® renewable bio-based Phase Change Material (PCM) cooling technology, is produced with materials of vegetable origin. Unlike petroleum-based phase change materials, the INUTEQ-PAC® bio-PCM is nontoxic and have a low flammability rating. Our bio-based PCM is 100% biodegradable, durable, reusable, 20% lighter than water, and do not produce condensation.
INUTEQ-PAC® bio-PCM is the only PCM available on the market which isREACHcompliant!

Yes. INUTEQ-PAC® phase change materials have earned the U.S. Department of Agriculture’s Certified Bio-based Product Label. The label verifies that the amount of renewable bio-based material in the product meets or exceeds levels set by the USDA. All INUTEQ-PAC® products, have been designated as 100% bio-based. All claims of a product’s bio-based amounts are verified by independent labs and monitored by the USDA.

We offer 5 different temperatures inserts:
• 6.5°C / 44°F
• 15°C / 59°F
• 21°C / 70°F
• 24°C / 75°F
• 29°C / 84°F

The time needed to fully activate the PCM depends on the INUTEQ-PAC® temperature and your cooling method:
*Ice water: approx. 20 minutes
*Freezer: approx. 40 minutes
*Refrigerator: approx. 60 minutes
You can also activate the PCM inserts by exposing them to any ambient temperature lower than;

1) 10°C / 50°F with the INUTEQ-PAC® 15°C / 59°F insert
2) 19°C / 66°F with the INUTEQ-PAC® 21°C / 70°F insert
3) 21°C / 70°F with the INUTEQ-PAC® 24°C / 75°F insert
4) 26°C / 79°F with the INUTEQ-PAC® 29°C / 84°F insert

You can keep the inserts in your freezer or refrigerator, so they are always ready to use. Lay the inserts flat in a single layer instead of stacking them.
Or, if you want to save space in your freezer for other things, they can be stored at room temperature. When placing inserts in a freezer, make sure they are dry, so they don't stick to the inside of your freezer.

The INUTEQ-PAC® bio-PCM is 20% lighter than water. Our standard coolpack inserts are 300 grams each.

Yes, the inserts can be re-activated over and over again.

1-4,5 hours, depending on the INUTEQ-PAC® coolpack temperature you use.

All INUTEQ-PAC® bio-PCM products are 100% made in the Netherlands.